Epson FX-980 - Manual (Page 153)

7
Troubleshooting
Troubleshooting 7-3
R4C3430
Rev. C
A5 size CHAP7.FM
5/4/99 Pass 0
R Proof Sign-off:
E.Omori _______
<Kimura> _______
<Editor Name> _______
f Paper Out
n Pause
••• Continuous paper is not fed to the standby position.
Tear off the printed document at the perforation; then press the
Load/Eject button. The printer feeds the paper to the standby
position. Press the Pause button to turn off the Pause light.
••• A single sheet of paper is not fully ejected.
Press the Load/Eject button to eject the sheet. Then press the
Pause button to turn off the Pause light, if necessary.
••• Paper is jammed in the printer.
Clear the paper jam as described on “Clearing Paper Jams” on
page 7-16.
f Pause – The print head is overheated.
Wait a few minutes; the printer resumes printing automatically
once the print head cools.
f Paper Out
f Pause
f f
Tear Off/Bin
f f Font
– An unknown printer error has occurred.
Turn off the printer and leave it off for several minutes; then turn
on the printer again. If the error recurs, contact your dealer.
n = on, f = flashing
••• = short series of beeps (three beeps), ••••• = long series of beeps (five beeps)
Note:
The printer beeps once if you press a control panel button when the corresponding function
is not available.
State of
panel lights Beep
pattern Problem
Solution