Epson FX-980 - Manual (Page 231)

IN-2
L
R4C3430
Rev. C
A5 size SUNGN.IX
5/4/99 Pass 0
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
G
Graphics menu, 4-7
H
Hex dump, 7-19 to 7-20
High-capacity cut-sheet feeder, A-2,
A-5 to A-6
I
IBM 2380 Plus emulation control
codes, C-18
Installing
cut-sheet feeder, A-5 to A-6
EPSON Status Monitor 2, 6-3 to 6-4
front push tractor, 2-19 to 2-20
interface card, A-19
paper tension unit, 2-32
ribbon cartridge, 1-6 to 1-11
tractor in the pull position,
2-21 to 2-23
Interface card, A-3
installing, A-19
L
Loading
continuous multi-part forms, 2-33
continuous paper with labels, 2-34
envelopes, 3-6 to 3-7
paper onto
front push tractor,
2-12 to 2-17
pull tractor, 2-23 to 2-28
rear push tractor, 2-6 to 2-10
postcards, 3-7 to 3-8
roll paper, A-16 to A-18
single-sheet multi-part forms,
3-4 to 3-5
single sheets in
front paper slot, 3-11 to 3-13
top paper slot, 3-8 to 3-10
Lock lever, A-8
M
Micro adjust
feature, 3
mode, 2-38 to 2-40
Monitoring preference, 6-12 to 6-14
O
Options, 9, 4-12, A-2 to A-20
P
Paper guide base
attaching, 1-12 to 1-13
Paper jam
clearing, 7-16
Paper menu, 4-6
Paper paths, 3 to 9
Paper release lever, 2, 2-2 to 2-3
Paper stacker, A-9
Paper tension unit
installing, 2-32
removing, 2-22
Paper thickness lever, 2-4 to 2-5
Parallel interface, 1-15
pitch button, 5-3
Plugging in the printer, 1-13 to 1-14
Printer driver, 1-17
accessing
from Windows 3.1,
4-9 to 4-11
from Windows 95 or 98,
4-3 to 4-5
from Windows NT 3.5x,
4-18 to 4-21
from Windows NT 4.0,
4-13 to 4-15