Epson FX-980 - Manual (Page 43)

1
Setting Up the Printer 1-19
R4C3430
Rev. C
A5 size CHAP1.FM
5/4/99 Pass 0
R Proof Sign-off:
E.Omori _______
<Kimura> _______
<Editor Name> _______
Installing the printerdriver using the EPSON installation program
The installation program is on the cd-rom that came with the
printer. EPSON recommends the use of the program for the
printerdriver installation.
Note:
If you're installing the printerdriver in a Windows NT 4.0 environment,
you may need certain network rights. See your network administrator
for more information.
Follow these steps to install the printerdriver:
1. Make sure that the printer and computer are switched off.
2. Switch the PC on. Windows starts automatically.
3. Insert the CD-ROM containing the printer software into the
CD-ROM drive. The AutoPlay function of the CD-ROM drive
automatically starts the installation program on the CD-ROM.
Note:
If your system does not have a CD-ROM drive, you can make a
floppy disk version from which to install the printer software.
If the installation program does not start automatically, click
on
Start and then on Run . In the Run dialog box, enter the
command E:\START and click on the OK button.
Note:
If your CD-ROM drive has a drive letter other than "E", substitute
the appropriate letter.
The installation program starts. The subsequent procedure is
menu-driven, i.e., you can select the relevant options from a
list simply by clicking with the mouse. The remainder of the
installation is automatic and you do not need to enter any
more information.