Epson FX-980 - Manual (Page 31)

1
Setting Up the Printer 1-7
R4C3430
Rev. C
A5 size CHAP1.FM
5/4/99 Pass 0
R Proof Sign-off:
E.Omori _______
<Kimura> _______
<Editor Name> _______
3. Lift the printer cover by its back edge and then pull it
straight up and off.
4. Make sure that the print head is not hot; if it is, let it cool for
a few minutes before touching it. Then slide the print head to
the ribbon installation position (the indented portion of the
paper tension unit) by hand.
Note:
When the pull tractor is installed, you can replace the ribbon
cartridge when the print head is not in the ribbon installation
position.
1-2.eps
1-3-1.eps