Epson FX-980 - Manual (Page 54)

2-8 Printing on Continuous Paper
R4C3430
Rev.C
A5 size CHAP2.FM
5/4/99 Pass 0
L Proof Sign-off:
E.Omori _______
<Kimura> _______
<Editor Name> _______
4. Release the left and right sprockets by pulling the sprocket
lock levers forward.
5. Slide the left sprocket to the left margin of the paper using the
scale on the printer. (Printing starts at the “0” mark.) Then
push the lever back to lock it in place.
Note:
See “Paper alignment” and “Printable area” in Appendix C for
more information on the left margin position.
6. Slide the right sprocket to match the width of your paper, but
do not lock it. Move the paper support midway between the
two sprockets as shown above.
front of the printer
front of the printer
2-10.eps