Canon i-SENSYS MF244dw - Manual (Page 356)

Checking the SSID and Network Key(P. 183)
Setting Up Connection by Specifying Detailed Settings(P. 179)
● Connect again by selecting a wireless router or by manually changing the WEP authentication method to
<Open System>.
Setting Up Connection by Selecting a Wireless Router(P. 176)
Setting Up Connection by Specifying Detailed Settings(P. 179)
The authentication method of the machine is set to <Shared Key>, but that of the wireless router is set to
"Open System."
● Change the WEP authentication method to "Shared Key" at the wireless router, and connect again. For
more information about how to change, see the instruction manuals for your networking devices or
contact your manufacturer.
Could not update the device time because its battery has run out. Cannot
use Google Cloud Print if the time settings are incorrect.
The machine's battery has run out and the correct time settings could not be kept.
● Set the correct time again.
Current Date/Time Settings(P. 304)
Direct Connection terminated.
Connection between the machine and the mobile device was terminated.
● Reestablish Direct Connection.
Using the Machine in Direct Connection (in Access Point Mode)(P. 143)
Google Cloud Print not avail. Server auth err
Cloud Print could not perform server authentication, or could not acquire information for registration.
● Check whether the date and time settings are correctly specified.
Date/Time Settings(P. 303)
Google Cloud Print not avail. Server comm err
Cloud Print is unavailable due to an error.
Check whether the machine is correctly connected to a wireless LAN or wired LAN.
Connecting to a Wireless LAN(P. 169)
Connecting to a Wired LAN(P. 168)
● A port that is used for Cloud Print may be blocked by a firewall or other protection. Check whether the
5222 port is available with your computer.
● If a proxy server is used on the network, check whether the proxy settings on the machine and the server
are correct. For details, contact your Network Administrator.
Troubleshooting
350