Ericsson Multi-Format Receiver RX1290 - Manual (Page 132)

Technical Specification
B.5.1.2 Digital Video
Table B.20 Digital Video Output Connectors
Item Specification
Safety status SELV
Connector type BNC, Female, 75 Ω
Connector designation HD SDI 1
HD SDI 2
HD SDI 3
Output standard (USA) ANSI/SMPTE 292M
SDI output level 800 mV pk-pk nominal ±10%
Jitter Performance, Nominal
SMPTE Recommended Practices RP 192 –1996
Jitter Measurement Procedures in Bit-Serial
Digital Interfaces
Table B.21 625 Line
Description Test Signal Limit
Bar Level VITS17 700mV +/- 7mV
Bar Tilt VITS17 <0.5%
Sync Level VITS17 300mV +/- 3mV
DC Offset VITS17 +/- 100mV
Chrominance to Luminance
Gain Inequality Color Bars 100 +/- 5%
Chrominance to Luminance
Phase Inequality VITS17 <20nS
K factor K 2T VITS17 <1%
Pulse X bar K rating VITS17 100 +/- 1%
Frequency Response
(MultiBurst) VITS18 0.5 MHz
VITS18 1 MHz
VITS18 2 MHz
VITS18 4 MHz
VITS18 4.8 MHz
VITS18 5.8 MHz 0dB +/- 0.2 dB
0dB +/- 0.2 dB
0dB +/- 0.2 dB
0dB +/- 0.2 dB
0dB +/- 0.2 dB
0dB +/- 0.2 dB
Differential Gain VITS330 <1.5%
Differential Phase VITS330 <1 Degree
Non-Linearity VITS17 <5%
Jitter VITS17 <5nS
EN/LZT 790 0003/2 R1A B-18