Ericsson Multi-Format Receiver RX1290 - Manual (Page 64)

Operating the Equipment Locally
3.9.3 Transport Stream Output Bit-rates
The Maximum input/output rates are described in Table 3.39.
Table 3.39 Maximum Descrambled Transport Stream Output Bit-rates
Level of
Descrambling TSO Setting Input Output
None POST INPUT 160 Mbps 160 Mbps
Common Interface,
BISS or Director POST TS
DESCRAMBLE 100 Mbps 100 Mbps
Common Interface POST TS
DESCRAMBLE 55 Mbps 55 Mbps
3.9.4 Transport Stream Packet Lengths
The input transport stream packet lengths may be 188/204/208 bytes. With the
transport stream output set to POST INPUT or POST TS DESCRAMBLE, the
output packet length is the same as the input. With the transport stream output set
to POST ES DESCRAMBLE, the output is always 188 bytes.
3.10 Setting Up the Alarms (Menu 6)
Menu 6 allows a selection of Alarms to be edited.
Table 3.40 Setting Up the Alarms
Step Action Result
1 Go to Menu 6. Accesses the Alarms menu.
2 Scroll to Menu 6.6 and edit the
BIT ERROR RATE range (9.9 E-
1 to 1.0 E-8) and status (NO
ALARM, SET ALARM ONLY).
Press Save. Edits the BER alarms menu.
3 Scroll to Menu 6.1 and edit the
TRANSPORT STREAM menu
(NO ALARM, SET ALARM
ONLY). Press Save. Edits the Transport Stream alarms menu.
4 Scroll to Menu 6.2 and edit the
VIDEO menu (NO ALARM, SET
ALARM ONLY). Press Save. Edits the Video alarms menu.
5 Scroll to Menu 6.3 and edit the
AUDIO 1 menu (NO ALARM,
SET ALARM ONLY). Press Save. Edits the Audio 1 alarms menu.
EN/LZT 790 0003/2 R1A 3-26