Ericsson Multi-Format Receiver RX1290 - Manual (Page 157)

Menus
Table C.14 Video Menu
Display Title: Video Description
XX Stream PID ZZZZ
YYYY XX is the number of video streams
ZZZZ is the currently selected video stream PID
YYYY is the currently selected video stream status (OK, STOP, FAIL)
Resolution XXXXXXXXX
Frame Rate YY.YY Hz XXXXXXXXX is the current video resolution (e.g. 1920 x 1080)
YY.YY is the current video frame rate (25 Hz, 29.97 Hz)
Coding mode XXXXX
Profile YYYYY Coding mode is the current video coding (4:2:0, 4:2:2)
Is the current video profile (ML@HL)
GOP Structure Y…..Y
Pixel Aspect Ratio YYY Y…..Y video GOP structure and length
YYY is the current video aspect ratio (16:9)
Rate Buffer Level XXX%
Bit-rate YY.YY Mbit/s XXX is the current video rate buffer level fill percentage
YY.YY is the current video stream bit-rate
Fail mode YYYYYYYYYYYY YYYYYYYYYYYY is the editable parameter for setting the response to
loss of video (FREEZE FRAME, BLACK FRAME, BLUE FRAME,
75% BARS AND RED, BLUE PLUS TEXT, RED PLUS TEXT, BLACK
PLUS TEXT)
Test Pattern
XXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXX is the editable video test pattern to
be displayed:
NONE, 75% BARS AND RED, MOVING BAR, BORDER, 100%
COLOUR BARS, PATHOLOGICAL, MULTIBURST, MONITOR
LINEUP, CONTRAST
Test Pattern Standard
XXXXXXXX XXXXXXXX is the editable standard for the test pattern:
AUTO, 1080i 30 Hz, 1080i 29.97 Hz, 1080i 25 Hz, 1080i 24 Hz, 1080i
23.976 Hz, 720p 60 Hz, 720p 59.94 Hz, 720p 50 Hz, 480i 29.97 Hz,
576i 25 Hz
Framesync XXXXXXX
YYYYYYYY XXXXXXX is the editable parameter for Framesync enable (ENABLED,
DISABLED)
YYYYYYYY shows the presence of a framesync input (SIGNAL NOT
PRESENT, SIGNAL PRESENT, FRAME RATE MISMATCH, SIGNAL
LOCKED);
Framesync PAL Offset XXXXXX
Framesync NTSC Offset YYYYYY XXXXXX is the editable PAL framesync offset range –199999
to+199999 pixels
YYYYYY is the editable NTSC framesync offset range –199999 to
+199999 pixels
4:2:0 Delay XXX ms
4:2:2 Delay YYY ms XXX is the editable parameter for delaying 4:2:0 video frames (0 to
100 ms)
YYY is the editable parameter for delaying 4:2:2 video frames (0 to
100 ms)
Output Mode YYY% YYY is the editable video output mode (RGB, YPbPr)
Trisync Mode Trisync on (NONE, ALL, GREEN)
EN/LZT 790 0003/2 R1A C-15