Ericsson Multi-Format Receiver RX1290 - Manual (Page 149)

Menus
C.4 Presets Menu Items (Menu 1)
The Presets menu contains up to 40 editable preset numbers in the range 01 – 40.
Selecting a Service via the Presets menu automatically reconfigures the input of the
Multi-Format Receiver. Each preset can have a selected language, network name
and service provider associated with it.
Table C.2 Presets Menu Items
Display Title: Presets Description
Select #YY of 40
XXXXXXXXXXXXXXXXXXXXXXXX Where YY is the EDITABLE preset number in the range 01 – 40;
XXXXXXXXXXXXXXXXXXXXXXXXX is the stored preset
service name
Save
XXXXXXXXXXXXXXXXXXXXXXXX as
#YY of 40 Where XXXXXXXXXXXXXXXXXXX is the current service name
from the SDT;
YY is the EDITABLE preset number in the range 01 – 40
C.5 Input Status Menu (Menu 2)
C.5.1 Overview
The Input Status menu is the primary reference for transport stream lock status.
Table C.3 Input Status Menu Items
Display Title: Input Description Section
WWWWWWWWWW ZZZ TID XXXXX
Bit-rate YYY.YY Mbit/s WWWWWWWWWW is the transport lock status
(LOCKED, NOT LOCKED)
XXXXX is the transport stream ID
YY.YY is the Transport stream rate (YYY.YY
above 100 Mbit/s)
ZZZ indicates the packet byte length of the current
TS (188, 204)
Input Selection The submenu allows the user to select the TS
source. C.5.2
Input Selection Option The submenu accesses the option card
parameters. C.5.4
C.5.2 Input Selection Menu
The Input Selection menu allows the user to select the Transport Stream source.
EN/LZT 790 0003/2 R1A C-7