Ericsson Multi-Format Receiver RX1290 - Manual (Page 94)

Preventive Maintenance and Fault-finding
EN/LZT 790 0003/2 R1A 7-8
Caution!
When replacing the power input fuse, always ensure that a fuse of the correct type
and rating is fitted. Failure to do so results in inadequate protection.
3. Replace the fuse in the carrier.
4. Insert the fuse carrier back in the AC power inlet.
To access the fuse, ease out the
notch with a small flat-blade
screwdriver.
Fuse Carrier
AC Power Inlet
Figure 7.2 Fuse Carrier
If the replacement fuse also blows, do not continue. Disconnect the equipment and
contact Customer Services (see Preliminary Pages) for advice.
7.7 Disposal
7.7.1 Molded Plugs
If the molded plug fitted to the mains cable supplied with this equipment is not
required, use another cable. If the supplied plug is to be changed, cut it off and
dispose of it safely.
Warning!
If the molded plug fitted to the mains cable supplied with this equipment is not
required, please cut it off and dispose of it safely. Failure to do this may endanger
life as live ends may be exposed if the removed plug is inserted into a mains outlet.
7.7.2 Equipment
Dispose of this equipment safely at the end of its life. Local codes and/or
environmental restrictions may affect its disposal. Check with your local authority.