Ericsson Multi-Format Receiver RX1290 - Manual (Page 162)

Menus
Table C.23 Network ID Menu
Display Title: Network ID Description
Network ID XXXXX
Original Network ID YYYYY XXXXX is the network ID from the current SDT (or ----- when SDT not
available)
YYYYY is the original network ID from the current SDT (or ----- when
SDT not available)
C.8 Transport Stream Output Menu
C.8.1 Overview
The Transport Stream Output submenu allows editing of the position of the ASI
output.
Table C.24 Transport Stream Output Menu
Display Title:
Transport Stream Output Description
XXXXXXXXXXX Position of TS output (POST INPUT, POST ES DESCRAMBLE,
POST TS DESCRAMBLE).
C.8.2 Output Connector Selector Submenu
This menu allows editing of the output connector functionality.
Table C.25 Output Connector Selector Submenu
Display Title: Output Description
Connector 1
Connector 2
Connector 2 Selection of output type (ASI, DISABLED, HD SDI, SD SDI, AUTO).
Selection of output type (ASI, DISABLED, HD SDI, SD SDI, AUTO).
Selection of output type (ASI, DISABLED, HD SDI, SD SDI, AUTO).
C.9 Alarms Menu (Menu 6)
C.9.1 Overview
The Alarms menu provides a summary of the alarm status.
EN/LZT 790 0003/2 R1A C-20