Customizing the self-timer, Shooting by touching the screen (touch shutter) – Canon PowerShot G3 X User Manual
Page 46
46
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Shooting by Touching the Screen
(Touch Shutter)
Still Images
Movies
With this option, instead of pressing the shutter button, you can simply
touch the screen and release your finger to shoot. The camera will focus
on subjects and adjust image brightness automatically.
1
Enable touch-shutter function.
z
Press the [
] button, choose [Touch
Shutter] on the [ 2] tab, and then
2
Shoot.
z
Touch the subject on the screen, and
then lift your finger immediately.
z
The camera shoots, as a shutter sound
is played.
z
To cancel touch shutter, choose [Off] in
step 1.
●
Even while the shot is displayed, you can prepare for the next
shot by touching [ ].
Customizing the Self-Timer
Still Images
Movies
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1
Choose [ ].
z
Following step 1 in “Using the Self-Timer”
(= 45), choose [ ] and press the
[
] button.
2
Configure the setting.
z
Press the [ ][ ] buttons to choose the
delay time or number of shots.
z
Press the [ ][ ] buttons or turn the [ ]
dial to choose a value, and then press the
[ ] button.
z
Once the setting is complete, [ ] is
displayed.
z
Follow step 2 in “Using the Self-Timer”
●
For movies recorded using the self-timer, recording begins after
your specified delay time, but specifying the number of shots has
no effect.
●
When you specify multiple shots, image brightness and white
balance are determined by the first shot. More time is required
between shots when the flash fires or when you have specified
to take many shots. Shooting will stop automatically when the
memory card becomes full.
●
When a delay longer than two seconds is specified, two seconds
before the shot, the lamp blinking and self-timer sound will speed
up. (The lamp will remain lit in case the flash fires.)