Sony E 16mm f/2.8 Lens - Manual (Page 25)

25
User Color Temp.
You can select and adjust the color temperature.
When using a measurement instrument for color
temperature adjustment, Konica Minolta Color
Analyzer CA-310/410 is recommended.
User LUT
3D LUT files (Cube files) created with the RAW
Viewer software or color grading tool can be
loaded from a USB memory.
Conv. Preset This setting is available with the
optional “PVML-HSX1” license (sold
separately). Select a conversion preset
to be used for the selected channel.
You can select from "Preset1" to
"Preset10."
Copy From Copy another channel’s data to the
selected channel.
Submenu Setting
User Color Temp. Select the color temperature setting to
be adjusted.
Name Sets the color temperature name.
R/G/B Gain Adjusts the color balance (gain) of R
(red)/G (green)/B (blue).
Submenu Setting
R/G/B Bias Adjusts the color balance (bias) of R
(red)/G (green)/B (blue). (Default
value: 0)
Notes
 To select the color for adjustment,
press the corresponding function
button. Pressing the F9 button
selects “R,” F10 button selects “G,”
F11 button selects “B,” and F12
button selects “RGB.”
 In consideration of the LCD
characteristics, the internal signal
level is set as follows for this unit
when the color temperature is
adjusted.
When R/G/B Gain is adjusted:
Equivalent to 100 cd/m
2
When R/G/B Bias is adjusted:
Equivalent to 10 cd/m
2 (HDR),
Equivalent to 2.7 cd/m 2 (SDR)
When R/G/B Bias is adjusted, a
high internal signal level may cause
an error in the black level. Check
the black level with the PLUGE
signal, etc. after adjusting the color
temperature, and adjust the black
level under “Brightness” of “Chr./
Bright./Cont.” in “Ch. Setting” as
necessary.
Copy From Select from the following items to copy
the selected color temperature data.
 D65
 D93
 D60
 DCI
 User1 to User10
Note
The color temperature data is used
commonly regardless of the signal
format or the EOTF setting. When the
color temperature is adjusted under
certain conditions, the adjusted result
is reflected in all displays on which the
same color temperature data is set.
Signal Select the signal to adjust the color
temperature.
 Internal: Select to adjust the color
temperature by using the
internal signal.
 External: Select to adjust the color
temperature by using the
signals input from an external
device.
Submenu Setting