Sony E 16mm f/2.8 Lens - Manual (Page 63)

63
Enhanced Monitor Out
This function is available with the optional “PVML-HSX1” license (sold separately). The video signal being
displayed on the screen is output as an SDI signal from the ENHANCED MONITOR OUT connector in sync
with the input SDI signal. It enables 3G/HD-SDI Multi-Link to 12G/6G-SDI Single-Link conversion and 4K/
UHD to 2K/HD signal conversion as well as selecting Video Range (Full Range/Limited Range) for output.
It also allows the output of User LUT-applied signals and HDR-SDR converted signals. See page 79 for
the correspondence table between input and output SDI signal formats.
Notes
 HDMI input signals cannot be output.
 The signal structure is fixed at 4:2:2 YCbCr 10bit.
 The output (transmission) of Metadata such as Embeded Audio data, Time Code data, and SR Live
Metadata, which are Ancillary Data of SDI input signals, is not supported.
 In Quad View, the Conversion (HDR SDR conversion) function cannot be applied to the output signal.
 In Quad View and Side by Side, the signal displayed on Screen A is output. However, it is not output
when Screen A is an HDMI signal.
The following shows the specifications of OETF, color space (gamut), and Transfer Matrix (transfer
matrix) output from the ENHANCED MONITOR OUT connector when the User LUT function and HDR-SDR
conversion function are ON/OFF.
The state in which the User LUT data is applied in “User LUT” in “Ch. Setting” is referred to as User LUT
function ON.
1) When OETF (HDR SDR Relation Table information of SR Live Metadata) is S-Log3 while “SR Live Auto“ is “On,“ or when “EOTF“ in “Ch.
Setting“ is set to “S-Log3“ or “S-Log3(Live HDR)“ while “SR Live Auto“ is “Off,“ the OETF of the output SDI signal is identified as S-Log3.
User LUT function HDR SDR
Conversion
function OETF Color Space Transfer Matrix
OFF OFF Retains input signal
specifications
1)
Retains input signal
specifications Matrix of PID Byte3 Colorimetry
values for input SDI signals
 ITU-R BT.709
 ITU-R BT.2020
However, if it is a matrix other
than ITU-R BT.709/ITU-R
BT.2020, ITU-R BT.709 matrix will
be applied.
ON OFF Retains OETF
specifications for LUT
output
1)
Retains color space
specifications for LUT output Matrix of the color space setting
values in the “VPID/HDMI Auto”
and “SR Live Auto” settings or
the “Color Space” in “Ch.
Setting.”
 ITU-R BT.709
 ITU-R BT.2020
However, if it is a matrix other
than ITU-R BT.709/ITU-R
BT.2020, ITU-R BT.709 matrix will
be applied.
OFF ON SDR Setting values of “Out. Color
Space” in “Conv. Preset”
 ITU-R BT.709
 ITU-R BT.2020
Matrix for setting values of “Out.
Color Space” in “Conv. Preset”
 ITU-R BT.709
 ITU-R BT.2020
ON