Sony E 16mm f/2.8 Lens - Manual (Page 32)

32
HDR Black Comp. Sets On/Off for the HDR Black
Compression function (a function to
submerge the black level of HDR
images to match the black level of SDR
images). Use the same settings as that
for the HDR Black Compression
function on your camera. If
“Conversion Mode” is “Display
Referred,” this parameter is fixed to
“Off.”
Out. OETF Displays the output signal OETF (SDR
fixed). When the Conversion function
is turned on, the unit automatically
sets EOTF to 2.4(SDR) for the screen
display.
Out. Color Space Select the color gamut of the output
signal between "ITU-R BT.709" and
"ITU-R BT.2020." When the Conversion
function is turned on, the unit
automatically adjusts the color space
to match the "Out. Color Space" setting
for the screen display.
HDR SDR Setup Configures the HDR to SDR conversion
settings.
 Black Level: Adjusts input and
output black levels.
 Setting Mode: Selects
whether or not the input
video signal source is a Sony
system camera from “Sony
System Cam.” or “Others.”
 Master Black: Sets the master
black value of an input video
signal source. This setting is
enabled when "Setting Mode"
is set to "Sony System Cam."
 HDR Blk. Ofst.: Sets the HDR
black offset value of an input
video signal source. This
setting is enabled when
"Setting Mode" is set to "Sony
System Cam."
 In. Black Level: Sets the black
level value (HDR) of an input
signal. This setting is enabled
when “Setting Mode” is set to
“Others.”
 Out. Blk. Lvl.: Sets the black
level value (SDR) of an output
signal. This setting is enabled
when “Setting Mode” is set to
“Others.”
When "Conversion Mode" is
"Display Referred," "Master
Black," "HDR Blk. Ofst.," "In.
Black Level" and "Out. Blk. Lvl."
are fixed at "0.0."
 HDR SDR Gain: Sets the gain
amount for HDR to SDR
conversion.
 HDR Contrast: Shows the
percentage of HDR when
converted to 100% of SDR
with the gain amount set by
HDR
 SDR Gain.
Submenu Setting
 Knee: Sets the Knee (high brightness
compression) function On/Off
for HDR to SDR conversion.
When "Gamma Table" is
"Hyper," "Knee" is fixed to "Off"
regardless of its setting value.
 Point: Sets the knee point
position for the Knee
function. Even if the set value
is changed, the actual knee
point position may not
change.
 Slope: Sets the knee slope for
the Knee function.
 Gamma Table: Select the gamma
curve type from "Standard" or
"Hyper." If “Conversion Mode” is
“Display Referred,” the internal
fixed value is applied.
 Standard: Select a value from
”1" to "7."
 Hyper: Select a value from ”1"
to "4."
 Gamma Step: Sets the gamma
intensity (step). When
"Conversion Mode" is "Display
Referred" or when "Gamma
Table" is other than "Standard,"
this parameter will be invalid
regardless of its setting value.
 Gamma Level: Sets the gamma
intensity (analog). When
“Conversion Mode” is “Display
Referred” or “Gamma Table” is
other than “Standard,” this
parameter will be fixed at “0”
regardless of its setting value.
 SDR White Clip: Sets the white
clipping function On/Off for
HDR to SDR conversion.
 Level: Sets the video level for
white clipping.
Additional Paint Sets the additional painting (additional
image quality adjustment) function
On/Off. If "Additional Paint" is "Off,"
the image quality adjustment settings
in this menu will be disabled.
 White Balance: Sets the white
balance adjustment function
On/Off.
 R: Sets the R gain for white
balance adjustment.
 B: Sets the B gain for white
balance adjustment.
 Master Gain: Sets the gain function
On/Off.
 Level: Sets the gain amount.
Submenu Setting