3 load filament, Ilament – Afinia H+1 3D Printer User Manual

Page 13

Advertising
background image

4.3 Load Filament

The

H+1

comes with no filament installed. You have to manually install the filament

before printing anything. In order to get a good quality print, we recommend use

Afinia's

filaments.

You will find a reel of 500g ABS filament that comes

inside

the

H+1

cardboard box.

To install the filament, please following the instruction below:

1.

Find the filament reel that comes with the machine.

2.

Remove the vacuum bag.

3.

Find the end of the filament, and use

a snipper

to make a clean cut of the end.

4.

Open the door of the filament Bay.

5.

Hold the end of the filament straight up, and feed it into the guiding tube in the

filament bay.

6.

Keep feeding the filament until the end of the filament sticks out from the other

end of the guiding tube (You can open the top lid, and make sure the filament sticks
out).

Contact

Afinia 3D

: support@

afinia.com

12

Figure 4.3

Load Filament

Advertising