Afinia H+1 3D Printer - Manual (Page 4)

1.2 Printing Environment
As light odor could be generated during printing, keep the printer in a well ventilated
environment. The
H+1
's ideal working temperature is between 15°C and 30°C with a
relative humidity between 20–50%. Printing at temperatures out of this range could
cause adverse effects to the printing process and print quality.
1.3 One Year Warranty
Afinia 3D
warrants to the original purchaser that this product is free from defects in
material and workmanship.
Afinia 3D
will for one year, at its option, repair or replace
at no charge for parts and labor from the date you purchased the product from
Afinia
3D
. Print heads, Nozzles and Print Boards are warranted for ninety (90) days.
•
Afinia 3D
reserves the right to determine the validity of all warranty claims.
• Warranty is voided if the product serial number has been altered or removed.
• Warranty is voided if the product has been misused or damaged or if evidence is
present that the product was altered, modified, or serviced by unauthorized service
people.
The above stated warranty is exclusive and replaces all other warranties, express or implied, including
those of merchantability and fitness for a particular purpose. Afinia, a division of Microboards
Technology, LLC, will not be liable for any other damages or loss, including incidental or consequential
damages and loss of profits or revenues from whatever cause, including breach of warranty negligence.
For the detailed Limited Warranty statement and to register your warranty, please visit our website at
https://afinia.com/support/warranty-registration/.
1.4 Compliance
Contact
Afinia 3D
: support@
afinia
.com 3
FCC ID: 2AAHW-3DP-25A
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.