7 config, Onfig – Afinia H+1 3D Printer User Manual

Page 26

Advertising
background image

5.7 Config

Config section contains five parameters, and the Network Settings .

Name

: it’s the printer’s name, you can change it on the

Afinia

Studio software.

The default name is the printer’s S.N number.

Sound

: Toggle the click sound while using touchscreen.

Preheat

: Toggle the build plate preheating option. If it is

on, the machine will start pre-heating 15 minutes ahead
of the start of the print job.
You can read the introduction of Preheating in
Maintenance -> Preheat in the Software User Manual.

Private

: Toggle the printer to set a password for private

use. Once this option is on, you can set a password for
your printer and your printer will not be accessible by
other users on the same network without obtaining the
password.

Password

: The password for the printer to protect your

printer from other people’s access. Click the text field to
enter your password.

Contact

Afinia 3D

: support@

afinia.com

25

34°C | 37°C

500

252212

Preheat

Sound

Name

Private

Password

123456

Figure 5.8

Config

Advertising