5 print board selection, Rint, Oard – Afinia H+1 3D Printer User Manual
Page 41: Election
6.5 Print Board Selection
There are two types of print boards coming with the
H+1
, the Flex Glass Board, with
the smooth surface, and the Perf Glass Board, with the perforated surface, both of
which have glass board on the other side. You can always choose the glass as the
print surface, which makes the third print surface supported by
the H+1
.
Each of the print surface is made to serve for different printing purposes and provide
distinguishable finishing of the bottom layer of each printed model.
1.
Flex Glass Board:
• Stiff, with the smooth surface on one side and glass surface on the other.
• Medium first layer adhesion. Easy to remove raft.
• For printing models with not raft or no support settings, provide glossy and flat
finish for the bottom layer.
2. Perf Glass Board:
• Stiff, with the perforated surface on one side and glass surface on the other.
• Maximum first layer adhesion. More difficult to remove raft.
• For printing models with larger base size.
3. The glass surface of the Perf and Flex Board:
• The glass surface on the both print board.
• Minimum first layer adhesion;
• Stiff, with smooth surface. May require anti-slippage measures such as a glue
stick.
Notice:
Flex/ Perf Glass Board: Glass boards are easy to break. Please handle with
care.
Contact
Afinia 3D
40