Safety and printing environment, 1 safety precautions, Afety – Afinia H+1 3D Printer User Manual
Page 3: Recautions
1. Safety and Printing Environment
1.1 Safety Precautions
1.
The
Afinia H+1
3D printer requires the power adapter provided by the original
manufacturer, otherwise the machine could be damaged or even cause fire. Keep
the power adapter away from water and out of high temperature environments.
2.
During printing, the temperature of the nozzle of the printer could reach 260°C and
the temperature of print platform could be over 70°C. Do not touch these parts with
your bare hands when the printer is in the operation mode, not even with the heat
resistant gloves included in the accessories, as the temperature could damage the
gloves and injure your hands.
3.
During printing, the print head and other mechanical parts move at high speed.
Touching these parts while they are moving could cause injuries.
4.
Wear goggles when removing the supporting material from models or detaching
models from the build plates.
5.
When printing with plastic filaments, the process could generate light and, for
some people, annoying odor. It is recommended to run the printer in a well ventilated
environment. We also suggest to keep the printer in an environment with a stable
temperature as unwanted cooling could cause adverse effects to the print quality.
6.
When using the “Extrude” function, make sure there is enough space between the
print head nozzle and the build platform. 50mm is recommended, otherwise the
nozzle could be blocked.
7.
Fasten moving parts. Tie back loose hair, secure loose clothing and keep all
printer doors closed during operation.
8.
Do not leave the printer unattended during operation. Watch to make sure the first
a few layers adhere correctly.
WARNING, HOT SURFACES!
High Temperature: Do not touch!
Moving parts: Do not touch!
Flex / Perf Glass Board: Glass boards are easy to break. Handle
with care!
Contact
Afinia 3D
2