Afinia H+1 3D Printer - Manual (Page 27)

Network Connection
This section includes Ethernet Network Settings and Wi-Fi Network Settings.
Ethernet Network Settings:
1.
Plug an Ethernet cable to the LAN socket at the back of
the H+1
.
2.
The Ethernet connection Status icon should be appear in the Printer Status Bar .
3.
You now can go to Config to enter Network Settings section.
4.
Click Information button to edit the printer’s Ethernet Network Settings.
Contact
Afinia 3D
: support@
afinia.com
26
Figure 5.9
Printer Status Bar
Figure 5.10
Network Settings
Figure 5.11
Information