Kramer 4x4 Audio and Dante Mixer - Manual (Page 10)

Kramer Electronics Ltd.
FC-404NETxl – Connecting FC-404NETxl 8
Connecting the Outputs
Your FC-404NETxl is provided with a 3-pin terminal block for each output channel. This
connector offers a balanced output to interface with the input of another device.
Connection methods for balanced and unbalanced outputs are identical as the methods for
inputs as referenced in
Connecting the Inputs on page 6 .
Connecting to FC-404NETxl via RS-232
You can connect to FC-404NETxl via an RS-232 connection using, for example, a PC.
FC-404NETxl features an RS-232 3-pin terminal block connector allowing the RS-232 to
control FC-404NETxl .
Connect the RS-232 terminal block on the rear panel of FC-404NETxl to a PC/controller, as
follows:
From the RS-232 9-pin D-sub serial port connect:
•
Pin 2 to the TX pin on the FC-404NETxl RS-232 terminal
block
•
Pin 3 to the RX pin on the FC-404NETxl RS-232 terminal
block
•
Pin 5 to the G pin on the FC-404NETxl RS-232 terminal block
RS-232 Device FC-404NETxl
13