Kramer 4x4 Audio and Dante Mixer - Manual (Page 18)

Kramer Electronics Ltd.
FC-404NETxl – Using Embedded Webpages 16
Changing the input and output Labels
Change the input output name labels via the Matrix page.
To change an input/output label:
1. In the Navigation pane, click Matrix (or Mixer ). The Matrix (Mixer) page appears.
2. Click an input or output label (for example, IN 1). The label is ready for editing.
Figure 17: Changing Input Level
3. Change the name and click .
Label name is changed.
Selecting an input/output to route to the headphones
The HEADPHONES connector on the FC-404NETxl front panel is used to monitor the
signal sound on the input and the output. You can select one output or input at a time to route
to the headphones.
To route a signal to headphones:
1. In the Navigation pane, click Matrix (or Mixer ). The Matrix (Mixer) page appears.
2. Click the (headphones icon) in an input or output label (for example, IN 1).
The label turns green and that signal is routed to the headphones.
Figure 18: Routing a Signal to the Headphones
Signal is routed to headphones.
7