Kramer 4x4 Audio and Dante Mixer - Manual (Page 29)

Kramer Electronics Ltd.
FC-404NETxl – Using Embedded Webpages 27
Restarting and Resetting the Device
Restart the FC-404NETxl or reset it to its factory default parameters using the Device
Settings page.
Restarting the Device
To restart the device:
1. In the Navigation pane, click Device Settings . The General tab in the Device Settings
page appears (see Figure 32 ).
2. Click RESTART . The device restarts immediately.
Wait for the device to reload after device restart. There is no message before restarting.
Resetting the Device
To reset the device to its default parameters:
1. In the Navigation pane, click Device Settings . The General tab in the Device Settings
page appears.
2. Click Factory reset . The following message appears:
Figure 35: Settings Page – Factory Reset Message
3. Click PROCEED .
The device resets to its factory default parameters.