Kramer 4x4 Audio and Dante Mixer - Manual (Page 48)

Kramer Electronics Ltd.
FC-404NETxl – Protocol 3000 46
Function Description Syntax Parameters/Attributes Example
X-PRST-
RCL Recall saved preset list.
this is an extended
preset command using
preset type as first
parameter. This is used
essentially when we
have different types of
Presets inside the
same system.
To get the list of preset
types existing in your
product use the
command:
X-PRST-TYPES?
This is an Extended
Protocol 3000
command.
COMMAND
#X-PRST-RCL  preset_type,preset_id <CR>
FEEDBACK
~nn@X-PRST-RCL  preset_type,preset_id <CR><LF>
▪ preset_type –
o System Preset –
IOCONFIG.SYSTEM
▪ preset_id – preset index
Recall mixer preset 8:
X-PRST-
RCL
 IOCONFIG.SYSTEM,8
<CR>
X-PRST-
RCL-LAST Recall LAST preset per
type, this command just
retrieves the last preset
loaded from the history
of preset activity and
RECALLs it.
this is an extended
preset command using
preset type as first
parameter. This is used
essentially when we
have different types of
Presets inside the
same system.
To get the list of preset
types existing in your
product use the
command:
X-PRST-TYPES?
This is an Extended
Protocol 3000
command.
COMMAND
#X-PRST-RCL-LAST  preset_type <CR>
FEEDBACK
~nn@X-PRST-RCL-LAST  preset_type,preset_id <CR><LF>
▪ preset_type –
o System Preset –
IOCONFIG.SYSTEM
▪ preset_id – preset index
Recall the last mixer preset:
X-PRST-RCL-
LAST
 IOCONFIG.SYSTEM.
<CR>
X-PRST-
RCL-NEXT Recall NEXT preset,
this command
increments by one the
current preset id loaded
and loads it. If the index
is the highest, recall will
fail.
this is an extended
preset command using
preset type as first
parameter. This is used
essentially when we
have different types of
Presets inside the
same system.
To get the list of preset
types existing in your
product use the
command:
X-PRST-TYPES?
This is an Extended
Protocol 3000
command.
COMMAND
#X-PRST-RCL-NEXT  preset_type <CR>
FEEDBACK
~nn@X-PRST-RCL-NEXT  preset_type,preset_id <CR><LF>
▪ preset_type –
o System Preset –
IOCONFIG.SYSTEM
▪ preset_id – preset index
Recall next mixer preset:
X-PRST-RCL-
NEXT
 IOCONFIG.SYSTEM <
CR>
X-PRST-
RCL-PREV Recall previous preset,
this command
increments by one the
current preset id loaded
and loads it. If the index
is the lowest, recall will
fail.
this is an extended
preset command using
preset type as first
parameter. This is used
essentially when we
have different types of
Presets inside the
same system.
To get the list of preset
types existing in your
product use the
command:
X-PRST-TYPES?
This is an Extended
Protocol 3000
command.
COMMAND
#X-PRST-RCL-PREV  preset_type <CR>
FEEDBACK
~nn@X-PRST-RCL-PREV  preset_type,preset_id <CR><LF>
▪ preset_type –
o System Preset –
IOCONFIG.SYSTEM
▪ preset_id – preset index
Recall previous preset:
X-PRST-RCL-
PREV
 IOCONFIG.SYSTEM <
CR>