Kramer electronics ltd – Kramer 4x4 Audio and Dante Mixer User Manual
Page 49
Kramer Electronics Ltd.
FC-404NETxl
– Protocol 3000
47
Function
Description
Syntax
Parameters/Attributes
Example
X-PRST-
RESET
Reset preset.
this is an extended
preset command using
preset type as first
parameter. This is used
essentially when we
have different types of
Presets inside the
same system.
To get the list of preset
types existing in your
product use the
command:
X-PRST-TYPES?
This is an Extended
Protocol 3000
command.
COMMAND
#X-PRST-RESET
preset_type,preset_id
<CR>
FEEDBACK
~nn@X-PRST-RESET
preset_type,preset_id
<CR><LF>
▪
preset_type
–
o
System Preset
–
IOCONFIG.SYSTEM
▪
preset_id
– preset index
Reset preset 9:
X-PRST-
RESET
IOCONFIG.SYSTEM
,9
<CR>
X-PRST-
SAVED?
Get SAVED status for a
preset. This flag
indicates to the WEB if
a change have been
made since the last
RECALL and has not
been saved.
this is an extended
preset command using
preset type as first
parameter. This is used
essentially when we
have different types of
Presets inside the
same system.
To get the list of preset
types existing in your
product use the
command:
X-PRST-TYPES?
This is an Extended
Protocol 3000
command.
COMMAND
#X-PRST-SAVED?
preset_type
<CR>
FEEDBACK
~nn@X-PRST-SAVED
preset_type,saved_status
<CR><LF>
▪
preset_type
–
o
System Preset
–
IOCONFIG.SYSTEM
▪
Saved_status
– preset index
o
0
– False (not saved)
▪
1
– True (saved)
Get saved status of mixer
preset:
X-PRST-
SAVED?
IOCONFIG.SYSTE
M
<CR>
X-PRST-
STO
Store current changes
into a preset.
this is an extended
preset command using
preset type as first
parameter. This is used
essentially when we
have different types of
Presets inside the
same system.
To get the list of preset
types existing in your
product use the
command:
X-PRST-TYPES?
This is an Extended
Protocol 3000
command.
COMMAND
#X-PRST-STO
preset_type,preset_id
<CR>
FEEDBACK
~nn@X-PRST-STO
preset_type,saved_status
<CR><LF>
▪
preset_type
–
o
System Preset
–
IOCONFIG.SYSTEM
▪
preset_id
– preset index
Store changes into mixer
preset 9:
X-PRST-
STO
IOCONFIG.SYSTEM,9
<CR>
X- PRST-
TYPES?
Get the types of presets
that the system
supports and their
hierarchy.
COMMAND
#X-PRST-TYPES?
<CR>
FEEDBACK
~nn@X-PRST-TYPES
preset_type
<CR><LF>
▪
preset_type
–
o
IOCONFIG.SYSTEM
– used
for system preset per
IOConfig, we have 10 preset
banks per IOConfig setup,
Preset #1 is the default
system preset for this setup
and is READ ONLY, Preset
#2 is used for the first user
system preset, Preset #3 for
the second etc.
Get preset types:
X-PRST-TYPES?
<CR>
X-SIGNAL-
PIPE
Set a pipe between
Two outputs. This is
when we want to “tee” a
signal to another
output.
Used essentially into
FC-404NETxl
to output
audio signal to
HEADPHONES jack.
This is an Extended
Protocol 3000
command.
COMMAND
#X-SIGNAL-PIPE
<direction_type>
.
<port_format>
.
<port_index>
.
<signal_type>
.
<index>
,
<direction_type>
.
<port_format>
.
<port_index>
.
<signal_type>
.
<index>
<CR>
FEEDBACK
~nn@X-SIGNAL-PIPE
<direction_type>
.
<port_format>
.
<port_index>
.
<signal_type>
.
<index>
,
<direction_type>
.
<port_format>
.
<port_index>
.
<signal_type>
.
<index>
<CR><LF>
The following attributes comprise
the signal ID:
▪
<direction_type>
–
o
IN
o
OUT
▪
<port_type>
–
o
ANALOG_AUDIO
o
DANTE
o
ANALOG_JACK
▪
< port_index>
– The port
number as printed on the front
or rear panel: 1 to 4 for analog
audio, and 1 for Dante
▪
<signal_type>
– Signal ID
attribute:
o
AUDIO
<index>
– Indicates a specific
channel number when there are
multiple channels of the same type:
1 to 4 for Dante, and 1 for Analog
audio
Set the DANTE output 3 to
be routed to the
headphones:
#X-SIGNAL-PIPE
OUT
.
ANALOG_JACK
.
1
.
AUD
IO
.
1
,
OUT
.
DANTE
.
1
.
AUDI
O
.
3
<CR>