Kramer 4x4 Audio and Dante Mixer - Manual (Page 35)

Kramer Electronics Ltd.
FC-404NETxl – Technical Specifications 33
Technical Specifications
+ 4 Balanced Mono Audio
Line/Mic On 3-pin terminal blocks
Outputs 4 Balanced Mono Audio Line On 3-pin terminal blocks
Ports 1 Dante Network On an RJ-45 connector for 4 audio input channels
and 4 output streams
1 RS-232 On a 3-pin terminal block for device serial control
1 Ethernet On an RJ-45 connector for device service
Balanced Line Level
Input Impedance 50 kΩ
Maximum Level +10dBu (2.4Vrms)
Nominal Level +4dBu
Sensitivity Full power @ +10dBu (2.4Vrms)
Mic Level Input Impedance 10 kΩ
Maximum Level (Dynamic) -30dbu
Maximum Level (Condenser) -10dBu
Sensitivity Full power @ +10dBu (2.4Vrms)
Phantom Power 48VDC on/off per input
Line Level Output Impedance Balanced 500 Ω
Maximum Level +15dBu
Frequency Response 20Hz − 20kHz, ±0.1dB
Audio THD + Noise <0.03% 20Hz - 20kHz at unity gain
Crosstalk <-85dB, 20Hz to 20kHz
Indication LEDs Front Panel 4 Input signal/clipping LEDs
4 Output signal/clipping LEDs
1 Sys LED
1 Sync LED
1 Tx LED
1 Rx LED
1 Power on LED
Power Consumption 12V DC, 300mA
Source 12V DC, 2A, PoE-acceptor
Environmental
Conditions Operating Temperature 0° to +40°C (32° to 104°F)
Storage Temperature -40° to +70°C (-40° to 158°F)
Humidity 10% to 90%, RHL non-condensing
Regulatory
Compliance Safety CE
Environmental RoHs, WEEE
Enclosure Size DemiTOOL
Type Aluminum
Cooling Convection ventilation
General Net Dimensions (W, D, H) 19cm x 6cm x 2.7cm
(7.5" x 2.4" x 1.1")
Shipping Dimensions
(W, D, H) 34.5cm x 16.5cm x 5.2cm
(13.6" x 6.5" x 2")
Net Weight 0.3kg (0.7lbs)
Shipping Weight 0.76kg (1.7lbs) approx.
Accessories Included Power adapter and cord
Specifications are subject to change without notice at www.kramerav.com