Kramer 4x4 Audio and Dante Mixer - Manual (Page 36)

Kramer Electronics Ltd.
FC-404NETxl – Technical Specifications 34
Default Communication Parameters
RS-232
Baud Rate: 115,200
Data Bits: 8
Stop Bits: 1
Parity: None
Command Format: ASCII
Example (set analog input 3 audio level to 10): IN . ANALOG_AUDIO . 3 . AUDIO . 1 , 10 <CR>
Ethernet
DHCP ON by default
IP Address: 192.168.1.39
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
TCP Port #: 5000
UDP Port #: 50000
Default username: Admin
Default password: Admin
Device name: FC-404Net- {ID} where ID = the last 4 characters of the device’s serial number.
Dante
DHCP OFF by default
IP Address: 169.254.112.120
Subnet mask: 255.255.0.0
Default gateway: 169.254.0.0
Full Factory Reset
Webpages Go to: Device Settings-> General -> RESET
Protocol 3000: “ #factory ” command followed by “ #reset ” command.