Kramer electronics ltd – Kramer 4x4 Audio and Dante Mixer User Manual
Page 44
Kramer Electronics Ltd.
FC-404NETxl
– Protocol 3000
42
Function
Description
Syntax
Parameters/Attributes
Example
X-LABEL
Set the port label.
Labels are used
commonly by WEB
pages.
This is an Extended
Protocol 3000
command.
COMMAND
#X-LABEL
<direction_type>
.
<port_format>
.
<port_index>
,
label_txt
<CR>
FEEDBACK
~nn@X-LABEL
<direction_type>
.
<port_format>
.
<port_index>
,
label_txt
<CR><LF>
The following attributes comprise
the port ID:
▪
<direction_type>
–
Direction of the port:
o
IN
o
OUT
▪
<port_format>
– Type of
signal on the port:
o
ANALOG_AUDIO
o
ANALOG_JACK
o
DANTE
▪
<port_index>
– The port
number as printed on the front
or rear panel: 1 to 4 for analog
audio, and 1 for Dante
▪
signal_type>
– Signal ID
attribute:
o
AUDIO
▪
<index>
– Indicates a specific
channel number when there
are multiple channels of the
same type: 1 to 4 for Dante,
and 1 for Analog audio
label_txt
– ASCII characters
Set the port label (for analog
audio 1)
to “Player”:
#X-LABEL
in
.
analo_aud
io
.
1
.
analog_audio
.
1
,
P
layer
<CR>
X-LABEL?
Get the port label.
Labels are used
commonly by WEB
pages.
This is an Extended
Protocol 3000
command.
COMMAND
#X-LABEL?
<direction_type>
.
<port_format>
.
<port_index>
<CR>
FEEDBACK
~nn@X-LABEL
<direction_type>
.
<port_format>
.
<port_index>
,
label_txt
<CR><LF>
The following attributes comprise
the port ID:
▪
<direction_type>
–
Direction of the port:
o
IN
o
OUT
▪
<port_format>
– Type of
signal on the port:
o
ANALOG_AUDIO
o
ANALOG_JACK
o
DANTE
▪
<port_index>
– The port
number as printed on the front
or rear panel: 1 to 4 for analog
audio, and 1 for Dante
▪
signal_type>
– Signal ID
attribute:
o
AUDIO
▪
<index>
– Indicates a specific
channel number when there
are multiple channels of the
same type: 1 to 4 for Dante,
and 1 for Analog audio
label_txt
– ASCII characters
Get the port label (for Dante
output 4):
#X-LABEL?
out
.
dante
.
1
.
audio
.
4
<CR>
X-MIC-
TYPE
Set microphone type.
This is an Extended
Protocol 3000
command.
COMMAND
#X-MIC-TYPE
<direction_type>
.
<port_format>
.
<port_index>
,
mic_type
<CR>
FEEDBACK
~nn@X-MIC-TYPE
<direction_type>
.
<port_format>
.
<port_index>
.
<signal_type>
.
<index>
,
mic_type
<CR><LF>
The following attributes comprise
the port ID:
▪
<direction_type>
–
Direction of the port:
o
IN
▪
<port_format>
– Type of
signal on the port:
o
ANALOG_AUDIO
▪
<port_index>
– The port
number as printed on the front
or rear panel: 1 to 4
▪
signal_type>
– Signal ID
attribute:
o
AUDIO
▪
<index>
– Indicates a specific
channel number when there
are multiple channels of the
same type: 1
mic_type
– Dynamic/Condenser
(not case sensitive)
Set analog audio mic 3 type
to condenser:
#X-MIC-TYPE
in
.
analog
_audio
.
3
,
condenser
<CR
>
X-MIC-
TYPE?
Get microphone type.
This is an Extended
Protocol 3000
command.
COMMAND
#X-MIC-TYPE?
<direction_type>
.
<port_format>
.
<port_index>
<CR>
FEEDBACK
~nn@X-MIC-TYPE
<direction_type>
.
<port_format>
.
<port_index>
,
mic_type
<CR><LF>
The following attributes comprise
the port ID:
▪
<direction_type>
–
Direction of the port:
o
IN
▪
<port_format>
– Type of
signal on the port:
o
ANALOG_AUDIO
▪
<port_index>
– The port
number as printed on the front
or rear panel: 1 to 4
▪
signal_type>
– Signal ID
attribute:
o
AUDIO
▪
<index>
– Indicates a specific
channel number when there
are multiple channels of the
same type: 1
mic_type
– Dynamic/Condenser
(not case sensitive)
Get the microphone type for
analog audio 1 input:
#X-MIC-TYPE?
in
.
analo
g_audio
.
1
<CR>