Kramer 4x4 Audio and Dante Mixer - Manual (Page 19)

Kramer Electronics Ltd.
FC-404NETxl – Using Embedded Webpages 17
Routing Inputs to Outputs
Click a cross-point to connect any inputs to any of the outputs via the Matrix page and set the
connection volume.
FC-404NETxl enables performing the following functions:
•
Connecting Inputs to Outputs on page 17 .
•
Setting Cross-Point Volume on page 19 .
Connecting Inputs to Outputs
To route an input or several inputs to an output:
1. In the Navigation pane, click Matrix . The Matrix page appears.
2. Click an in-out cross-point (for example, IN 4 input and OUT 1 output).
The black cross-point turns green.
Figure 19: Matrix Page – In-Out Cross-Point