Kramer 4x4 Audio and Dante Mixer - Manual (Page 31)

Kramer Electronics Ltd.
FC-404NETxl – Using Embedded Webpages 29
4. If required, change the TCP/UDP port number.
5. Click SAVE .
After changing the IP address, reload the webpage with the new IP address.
Ethernet settings have changed.
Setting DHCP to Off
To set parameters when DHCP is set to On (default):
1. In the Navigation pane, click Device Settings . The General tab in the Device Settings
page appears.
2. Select the Network tab.
3. Set DHCP to Off .
4. Click SAVE .
5. Type the device name in the address bar of your browser to reload the page.
You can read the new IP address from the Communication Settings page.
DHCP is set to Off.
Setting Access Security
By default, the webpages are secured and require access permission (user name and
password are both:
Admin ).
FC-404NETxl enables performing the following security actions:
•
Disabling Security on page 30 .
•
Enabling Security on page 31 .
•
Changing the Password on page 31 .