Kramer 4x4 Audio and Dante Mixer - Manual (Page 21)

Kramer Electronics Ltd.
FC-404NETxl – Using Embedded Webpages 19
Setting Cross-Point Volume
Set the cross-point volume separately for each in-out connection.
To set the cross-point volume:
1. In the Navigation pane, click Matrix . The Matrix page appears.
2. Click the volume area (0dB, by default).
The volume window appears.
Figure 21: Matrix Page – Setting Cross-Point Volume
3. Set the cross-point volume (using the knob or entering the value and pressing Enter on
your keyboard). The cross-point volume is set and appears at the cross-point.
Figure 22: Cross-Point Volume Value