Kramer 4x4 Audio and Dante Mixer - Manual (Page 13)

Kramer Electronics Ltd.
FC-404NETxl – Connecting to FC-404NETxl via Ethernet 11
Figure 10: Internet Protocol Version 6 Properties Window
6. Select Use the following IP Address for static IP addressing and fill in the details as
shown in Figure 11 .
For TCP/IPv4 you can use any IP address in the range 192.168.1.1 to 192.168.1.255
(excluding 192.168.1.39) that is provided by your IT department.
Figure 11: Internet Protocol Properties Window
7. Click OK .
8. Click Close .
Connecting Ethernet Port via a Network Hub or Switch
You can connect the Ethernet port of FC-404NETxl to the Ethernet port on a network hub or
using a straight-through cable with RJ-45 connectors.
Configuring Ethernet Port
You can set the Ethernet parameters via the embedded Web pages.