Talkback / listenback mic input, Talk / listen output, Talkback / listenback monitor dim – MOTU Track16 - Desktop Studio FireWire/USB 2.0 Interface User Manual

Page 80: Engaging/disengaging talkback and listenback, Controlling talkback and listenback volume

Advertising
background image

C U E M I X F X

80

Figure 9-24: Typical hardware setup for Talkback and Listenback.

Talkback / Listenback Mic Input

To configure the talkback mic in CueMix FX, go to
the Inputs tab (Figure 9-3 on page 62) and click the
Focus button for the input that the talkback mic is
connected to. Click the Channel tab (Figure 9-8 on
page 66) an
d enable the

Talk

button.

Repeat this procedure for the Listenback mic,
except click the

Listen

button in the Channel tab.

Talk / Listen output

To configure the talkback and listen back outputs,
go to the Outputs tab (Figure 9-6 on page 65) and
enable the

Talk

button for any output pair on which

you’d like to hear the talkback mic. Similarly,
enable the

Listen

button for any output pair on

which you’d like to hear the listenback mic.

Talkback / Listenback Monitor Dim

Use the knobs next to the Talk and Listen buttons
(Figure 9-25) to determine the amount of
attenuation you would like to apply to all other

audio signals (besides the talkback/listenback
signal) when Talkback and/or Listenback is
engaged. To completely silence all other CueMix
audio, turn them all the way down. attenuation
only occurs when talkback or listenback is
engaged. Audio playing back from disk (your host
software) is not affected.

Figure 9-25: The Talkback/Listenback controls.

Engaging/disengaging Talkback and
Listenback

To engage Talk back or Listenback, press on the
Talk or Listen buttons (Figure 9-25) and then
release to disengage. Talkback and/or Listenback is
engaged for as long as you hold down the mouse
button. Option-click to make the buttons “sticky”
(stay engaged until you click them again — so you
don’t have to hold down the mouse). Or use the
Talkback menu items.

If you would like to engage both Talkback and
Listenback at the same time, enable the

Link

button

(Figure 9-25).

Controlling Talkback and Listenback volume

To control the volume of the Talkback and/or
Listenback mics, adjust their input trim in CueMix
FX.

Listenback
mic

Control room

Talkback
mic

Main outs

Live room

Line out 3-4

Headphone distribution amp

Talk dim

Listen dim

Advertising