Removing the battery and card – Canon EOS Rebel SL3 DSLR Camera with 18-55mm Lens (Black) User Manual
Page 38
38
4
Close the cover.
z
Press the cover until it snaps shut.
z
When you set the power switch to
<
1
>, the number of possible shots will
be displayed on the LCD monitor.
z
After opening the card slot/battery compartment cover, be careful not to swing
it back any further. Otherwise, the hinge may break.
z
The number of possible shots varies depending on the remaining capacity of
the card, image-recording quality, ISO speed, etc.
z
Setting
[
z
: Release shutter without card]
to
[Disable]
will prevent you
from forgetting to insert a card before shooting (
Removing the Battery and Card
1
Set the power switch to <
2
>
(
2
Open the cover.
z
Make sure the access lamp is off,
then open the cover.
z
If
[Saving...]
is displayed, close the
cover.
3
Remove the battery.
z
Press the battery lock lever as shown by
the arrow and remove the battery.
z
To prevent short-circuiting, be sure to
attach the provided protective cover
(2)
(1)