Canon EOS Rebel SL3 DSLR Camera with 18-55mm Lens (Black) - Manual (Page 474)

474
The LCD monitor does not display a clear image.
z If the LCD monitor is dirty, use a soft cloth to clean it.
z In low or high temperatures, the LCD monitor display may seem slow or
may look black. It will return to normal at room temperature.
Playback Problems
Part of the image blinks in black.
z It is the highlight alert ( = 327). Overexposed areas with clipped
highlights will blink.
The image cannot be erased.
z If the image is protected, it cannot be erased ( = 307).
The movie cannot be played back.
z Movies edited with a computer cannot be played back with the camera.
Operation sound and mechanical sound can be heard during
movie playback.
z If you operate the camera’s dials or lens during movie shooting, the
operation sound will also be recorded. Using the Directional Stereo
Microphone DM-E1 (sold separately) is recommended ( = 251).
The movie appears to freeze momentarily.
z If there is a drastic change in the exposure level during autoexposure
movie shooting, the recording will stop momentarily until the brightness
stabilizes. In such a case, shoot in the <
a
> mode ( = 221).
No picture appears on the TV set.
z Make sure the [ 5 : Video system] is correctly set to [For NTSC] or
[For PAL] (depending on the video system of your TV set).
z Make sure the HDMI cable’s plug is inserted all the way in ( = 305).