Exabyte MAGNUM 1X7 LTO User Manual
Page 102
86
P
RODUCT
M
ANUAL
1012581
C
HAPTER
6—V
IEWING
A
UTOLOADER
I
NFORMATION
b.
b.
b.
b.
Press
. The SCSI ID screen appears:
5.
5.
5.
5.
Press
(as needed) to return to the Home screen.
V
IEWING
THE
C
ARTRIDGE
I
NVENTORY
AND
B
AR
C
ODE
I
NFORMATION
The autoloader maintains a cartridge inventory to keep track of where
cartridges are located. In performing an inventory, the autoloader checks for
cartridges in the cells and scans each cartridge’s bar code label. The autoloader
uses this information to process commands from an application.
V
IEWING
THE
C
ARTRIDGE
I
NVENTORY
A cartridge inventory is automatically performed each time the autoloader is
powered on, each time a cartridge is inserted or removed from the autoloader,
and each time a cartridge is loaded or unloaded from the tape drive. You can
view the cartridge inventory to quickly determine which cells contain
cartridges and whether a cartridge is loaded in the tape drive.
To view the cartridge inventory:
1.
1.
1.
1.
At the Home screen, press
,
,
, or
to access the main menus.
If necessary, enter the operator panel password (see
2.
2.
2.
2.
Press
or
until the Status menu appears:
3.
3.
3.
3.
Press
to see the menu selections, then press
or
until a screen
similar to the following appears:
The numbers in the second line of the screen correspond to cartridge cells.
D r i v e
c u r r e n t
S C S I
I D :
n
V i e w
a
S t a t u s
V i e w
I n v e n t o r y :
– 2 3 4 5 6 7
D
If this appears...
The cell...
A number (1, 2, 3)
contains a cartridge
A dash (–)
is empty