Attaching the rails to the rack, Figure 2-4, Figure 2-5 – Exabyte MAGNUM 1X7 LTO User Manual
Page 29
O
CTOBER
2006
M
AGNUM
1
X
7 LTO A
UTOLOADER
13
A
TTACHING
THE
R
AILS
TO
THE
R
ACK
4.
4.
4.
4.
Assemble the right-side rail in the same way.
A
TTACHING
THE
R
AILS
TO
THE
R
ACK
1.
1.
1.
1. Left side rail assembly
—Position the left-side rail assembly in the rack so
that the front flange is behind the front screw holes in the rack.
2.
2.
2.
2.
Front of rack—Insert an M5 screw (A) through one of the front rack screw
holes (B) and engage the pem nut in the rail flange (C). If your rack has
square mounting holes or the holes are much larger than the screws
provided in the kit, use a washer. Finger-tighten the screw.
Figure 2-4 Assembling the right-side rail
Right-side rails (viewed from the back)
Front
Back
M5 screws
Front
flange
section
(black)
section
Back
flange
Front
Figure 2-5 Attaching the left-side rail to the rack
Level
M5 screw (A)
Rack rail
(back)
Front flange (C)
Rack rail
(front)
Front rack
screw holes (B)
M5 screw (A)
Back
flange (D)
Front of Rack
Back of Rack
Depth of rack (E)
(black)
(black)