Performing diagnostic tests – Exabyte MAGNUM 1X7 LTO User Manual
Page 93
O
CTOBER
2006
M
AGNUM
1
X
7 LTO A
UTOLOADER
77
P
ERFORMING
D
IAGNOSTIC
T
ESTS
P
ERFORMING
D
IAGNOSTIC
T
ESTS
To check basic autoloader functions, you can run a set of diagnostic tests from
the operator panel. These tests check the autoloader’s internal memory,
voltages, and SCSI functions. If you report a problem to Exabyte Technical
Support, you may be asked to run these tests and provide the results.
To run the autoloader’s diagnostic tests:
1.
1.
1.
1.
At the Home screen, press
,
,
, or
to access the main menus.
If necessary, enter the operator panel password (see
2.
2.
2.
2.
Press
or
until the Diagnostic menu appears:
3.
3.
3.
3.
Press
to see the menu selections, then press
or
until the following
screen appears:
4.
4.
4.
4.
Press
. A confirmation message appears:
5.
5.
5.
5.
Press
to start the test (or
to cancel the test).
The test begins. When the test is finished, the following screen appears:
6.
6.
6.
6.
Press
(as needed) to return to the Home screen.
P e r f o r m
a
D i a g n o s t i c
R u n
h a r d w a r e
s e l f t e s t ?
S t a r t
h a r d w a r e
s e l f t e s t
n o w ?
H / W
s e l f t e s t
p a s s e d .