Exabyte MAGNUM 1X7 LTO - Manual (Page 141)

O CTOBER 2006 M AGNUM 1 X 7 LTO A UTOLOADER 125
S
HIPPING
S
PECIFICATIONS
S
HIPPING
S
PECIFICATIONS
The autoloader’s shipping carton passes the tests described in International
Safe Transit Association (ISTA) Procedure 2A.
Table A-7 lists the weight and dimensions of the autoloader packed for
shipping. Packaging includes rackmounting kit, power cord, quick start guide,
product manual, and product CD.
S
AFETY AND
R
EGULATORY
A
GENCY
C
OMPLIANCE
The Magnum 1x7 LTO Autoloader complies with the safety and regulatory
agency standards listed below when installed in accordance with this manual.
U
NDERWRITERS
L
ABORATORY
GS
Table A-7 Shipping weight and dimensions
Shipping Weight Dimensions (Length x Width x Depth)
30.0 kg (66 lb) 88.9 x 57.2 x 22.9 cm (35.0 x 22.5 x 9.0 inches)
Caution
If you need to re-pack and ship the autoloader, refer to the packing instructions in
Chapter 9 . To avoid damaging the autoloader, use the original shipping carton and
packing materials (or replacement packaging obtained from your vendor). The
shipping carton and packing materials are not intended to be used for shipping
items other than or in addition to the autoloader and its accessories.
The Magnum 1x7 LTO Autoloader is listed by Underwriters Laboratories, Inc.
Representative samples of this product have been evaluated by UL and meet the
applicable U.S. and Canadian safety standards.
The GS Mark for the Magnum 1x7 LTO Autoloader demonstrates that it has met the
requirements of EN60950-1:2001