Exabyte MAGNUM 1X7 LTO - Manual (Page 95)

O CTOBER 2006 M AGNUM 1 X 7 LTO A UTOLOADER 79
6
V
IEWING
A
UTOLOADER
I
NFORMATION
The autoloader maintains an internal database containing extensive
information about its configuration and operations. This information is
available through the operator panel. During day-to-day operation, you
typically do not need to access this information. However, if you need to
contact Exabyte Technical Support about your autoloader, you may be asked to
check and report back on various settings and event results.
This chapter explains how to view the following:
 Autoloader information – code version, serial number, SCSI ID, statistics,
network addresses, and operating mode
 Autoloader sensor readings
 Tape drive information – code version, serial number, and SCSI ID
 Cartridge inventory and bar code information
 Cell statistics
 Event log
V
IEWING
B
ASIC
A
UTOLOADER
I
NFORMATION
To check the autoloader’s firmware code version, serial number, SCSI ID,
statistics, network addresses, and operating mode:
1. 1. 1. 1. At the Home screen, press , , , or to access the main menus.
If necessary, enter the operator panel password (see page 42 ).
2. 2. 2. 2. Press or until the Status menu appears:
V i e w a S t a t u s