Exabyte MAGNUM 1X7 LTO - Manual (Page 13)

O CTOBER 2006 M AGNUM 1 X 7 LTO A UTOLOADER xiii
A
BOUT
T
HIS
M
ANUAL
A
BOUT
T
HIS
M
ANUAL
This manual describes how to install, configure, operate, maintain, and
troubleshoot the Magnum 1x7 LTO Autoloader by Exabyte Corporation. It also
provides autoloader specifications.
W
HERE TO
L
OOK FOR
I
NFORMATION
Installation
If you are performing first-time installation:
 Read Chapter 1 for an overview of the autoloader’s features and
components.
 Read Chapter 2 for hardware installation instructions, including obtaining
the necessary accessories, installing the autoloader in a rack, installing
cartridges, and connecting the autoloader to a host system.
 Read Chapter 3 for configuration instructions, including how to use the
autoloader’s operator panel to access and set configuration options.
 Read Chapter 4 for information about using the autoloader’s Remote
Management utility to configure the autoloader, view information, and
monitor operation across an Ethernet network.
Operation
When you are ready to put the autoloader into operation:
 Read Chapter 5 to learn about inserting and removing cartridges from the
autoloader, loading and unloading cartridges in the tape drive, cleaning the
tape drive, and performing other basic autoloader operations.
 Read Chapter 6 to learn about viewing autoloader information including
code versions, serial numbers, statistics, sensor readings, and cartridge
inventory data.
Maintenance, Troubleshooting, and Service
If you need to perform basic autoloader maintenance, troubleshoot problems,
or return the autoloader for service:
 Read Chapter 7 for maintenance information, including instructions for
replacing the tape drive, uploading new firmware, and creating diagnostic
listings.
 Read Chapter 8 for troubleshooting tips.
 Read Chapter 9 for packing and shipping instructions if you need to return
the autoloader for service.