Edges of image not printing, Dropouts – HP 3200m User Manual
Page 186
184
Chapter 8 - Problem Solving and Product Maintenance
EN
Edges of image not printing
The product cannot print all the way to the edge of the media. The
product has a minimum margin of 0.25 in (6.4 mm) on each edge. If
printing or copying, the reduction setting might be set incorrectly.
l
For printing, check the reduction setting in the Print window from
within the program you are using.
l
For copying, check the reduction setting on the control panel (see
“Reducing or enlarging copies for the current job” on page 123) or
from the HP LaserJet Director.
Dropouts
1
Make sure that the environmental specifications for the printer
are maintained.
2
Remove the media from the paper insert tray, turn the stack over,
and reinsert it. (The wrapper on many reams of paper has an
arrow indicating the print side.) Try printing again.
3
Adjust the print density from the front panel.
4
Change the toner cartridge.