HP 3200m - Manual (Page 39)

EN Introduction
37
Managing General
Default Settings, Logs,
and Reports
Introduction
This chapter contains the procedures for printing reports and altering
general default settings for the product. For information about settings
that pertain to faxing, printing, copying, or scanning, see the
corresponding section. The instructions included in this section are
those for the control panel.
Adjusting settings from the software is sometimes the easiest
method. To gain access to default settings in the software on a
Windows-compatible computer, click
Start
, point to
Programs
, point
to
HP LaserJet 3200
, point to
Tools
, and then click
HP LaserJet
Device Configure
. To gain access to default settings on a
Macintosh-compatible computer, double-click the HP LaserJet
Director alias on the desktop, click Tools, and then click Device
Configuration.
CAUTION
When changing settings in a network environment, you are changing
settings for all users.
Hint
You can find out what product settings are currently selected by printing
a configuration report (see “Printing a configuration report” on
page 48.)
For further instructions about adjusting product settings from the
software, see the software Help.