HP 3200m - Manual (Page 94)

92
Chapter 4 - Faxing EN
How will I know if it’s working?
After product installation is complete, ask someone you know to send
you a fax. Make sure you provide the correct fax number.
To change answer ring patterns
Note
Do not change the All Rings default setting if you do not have ring
pattern service from your telephone company. If you do not have ring
pattern service, and you change this setting, the product might not be
able to receive faxes.
1
Press E NTER /M ENU .
2
Use the < or > key to select FAX SETUP and then press E NTER /
M ENU .
3
Use the < or > key to select FAX RECEIVE SETUP and then press
E NTER /M ENU .
4
Use the < or > key to select ANSWER RING PATTERN and then
press E NTER /M ENU .
5
Use the < or > key to select the ring pattern you want the product
to use when answering incoming fax calls, and then press E NTER /
M ENU to save your selection.
Note
If you have an answering machine or computer voicemail connected
to this line for the other phone number (on the single ring pattern), make
sure the product’s rings to answer is set to a
lower
number than the
rings to answer on the answering machine or voicemail. If it is not, the
product will be unable to receive fax calls.