HP 3200m - Manual (Page 200)

198
Chapter 8 - Problem Solving and Product Maintenance EN
FAX MEMORY
FULL
CANCELING
RECEIVE During the fax transmission, the product
ran out of memory. Only the pages that fit
into memory will be printed. Have sender resend the fax. If this
problem persists, cancel all fax jobs, or
clear the faxes from memory (see
“Clearing faxes from memory” on
page 89).
FAX MEMORY
FULL
CANCELING
SEND During the fax job, the memory filled. All
pages of the fax have to be in memory for
a fax job to work correctly. Only the pages
that fit into memory were sent. Cancel all fax jobs, or clear the faxes
from memory (see “Clearing faxes from
memory” on page 89).
FAX RECEIVE
ERROR An error occurred while trying to receive a
fax. Ask the sender to resend the fax.
Try faxing back to sender or to another
fax machine.
Check that the telephone cord is
securely connected by unplugging and
replugging the cord.
Check for a dial tone on the phone line
by pressing
F AX /S END .
Make sure the phone is working by
disconnecting the product, plugging in a
telephone to the phone line, and making
a voice call.
Connect the product to a different phone
line.
FAX SEND
ERROR An error occurred while trying to send a
fax. Try resending the fax.
Try faxing to another fax number.
Check that the telephone cord is
securely connected by unplugging and
replugging the cord.
Check for a dial tone on the phone line
by pressing
F AX /S END .
Make sure the phone is working by
disconnecting the product, plugging in a
telephone to the phone line, and making
a voice call.
Connect the product to a different phone
line.
GROUP DIAL
NOT ALLOWED
IN GROUP The speed-dial code you entered is
programmed for a group. Adding a group-
dial to another group-dial is not allowed. Enter one-touch keys (programmed as
an individual speed dial) or speed-dial
codes to a group-dial
GROUP IS
FULL.
[FAX] TO
STARTT The maximum number of fax numbers
that can be added to an ad-hoc group is
20. Resend to the adhoc group using less
fax numbers.
IN CLEANING
MODE.
PLEASE WAIT
1-3 MIN. The product is running an internal
cleaning cycle. Wait for the product to finish the
cleaning cycle. The message will clear
when the cycle is finished. For more
information about cleaning the product,
see “Cleaning the print paper path” on
page 211.
Message Cause Solution