Husky HME-423E - Manual (Page 18)

Configuration Using a Web Browser
4-2
4-4 Management Main Screen
See below for the web-based management interface main screen. The function menu is located on the left
hand side of this entrance page.
4-5 Basic Settings
This section covers the most commonly used configurations for maintain and control HME-421E/423E.
4-5.1 System Information
This feature allows you to assign the system name and location, and to view the system information.
System Name
Use this feature to assign a name for the switch. The maximum length is
64 bytes.
System Description
To display the description of the switch. This is READ ONLY information.
It cannot be modified.
System Location
Use this feature to specify the physical location of the switch. The
maximum length is 64 bytes.
System Contact
To provide the information of the contact person in case of problems. Use
this feature to enter the contact person info responsible for maintain this
switch.
Firmware Version To display the switch’s firmware version.
Kernel Version To display the switch’s kernel software version.
MAC Address
To display the unique hardware address assigned by Ethernet Direct
(default).