Husky HME-423E - Manual (Page 27)

Configuration Using a Web Browser
4-11
4-6.7.2 SMTP Configuration
This feature allows the administrator to set up the mail server IP, mail account, account password, and
forwarding email account for receiving the event alert.
Email Alert This feature is to enable or disable the email alert function.
SMTP Server IP
This feature is to set up the mail server IP address (when Email Alert
enabled, this function will then be available).
Sender
Type in an alias of the switch in complete email address format, e.g.
[email protected], to identify where the e-mail alert comes from.
Authentication
Check the box to enable and configure the email account and password
for authentication (when Email Alert is enabled, this function will then be
available).
Mail Account
This feature is to set up the email account, e.g. [email protected], to
receive the alert. It must be an existing email account on the mail server,
which you set up in SMTP Server IP Address column.
Password Use this feature to set up the email account password.
Confirm Password To reconfirm the password.
Rcpt e-mail Address 1-6
This feature is to assign up to 6 e-mail accounts which will also receive
the alert.
After finishing necessary configurations, click on Apply to save the settings.