Husky HME-423E - Manual (Page 25)

Configuration Using a Web Browser
4-9
hassle of manually assigning it a unique IP address.
HME-421E/423E offers the DHCP server function. HME-421E/423E will be a DHCP server if the DHCP
server function is enabled.
DHCP Server
This feature allows the administrator to enable or disable the
HME-421E/423E to be a DHCP server on the local network.
Low IP Address
This feature allows the administrator to define the low boundary of the IP
address range that the DHCP server will assign to devices that request
them.
High IP Address
This feature allows the administrator to define the high boundary of the IP
address range that the DHCP server will assign to devices that request
them.
Subnet Mask
This feature is to define the subnet mask for the dynamic IP assign
range.
Gateway This feature is to define the gateway in your network.
DNS
This feature is to define the Domain Name Server IP Address in your
network.
Lease Time (sec)
It is the time period that system will reset the dynamic IP assignment to
ensure the dynamic IP will not be occupied for a long time or the server
doesn’t know that the dynamic IP is idle.
After finishing necessary configurations, click on Apply to save the settings.
4-6.5 DHCP Client
When the DHCP server function is active, the HME-421E/423E will collect the DHCP client information and
display it here.
4-6.6 Port and IP Bindings by DHCP Server
This feature allows the administrator to pre-define a specific IP address within the dynamic IP range to a
certain port. When a device connected to this certain port requests for an IP address, this pre-defined IP
address will then be assigned to this connected device.